Escarpment Aeronautics

Drone Camera Module for Escarpment Aeronautics

Focus designed and delivered a drone camera module in three months, giving the client a working video link in time for its first prototype round.

Escarpment Aeronautics is a Canadian startup building its own AI-enabled autonomous drone platform, from the airframe to the onboard compute stack. As the team prepared for its first prototype round in September, the drone’s cameras still had no way to reach the onboard computer or the ground-side video systems. Escarpment partnered with Focus to design a camera module that takes video from a high-resolution camera sensor and delivers it, encoded, over several standard interfaces.

Escarpment needed a working module in just three months, and it had to meet “Made in Canada” certification. That ruled out PRC-origin components, in a market where most video processors are made in Asia.

Embedded Vision
Hardware Design
Embedded Linux
MIPI CSI-2
H.264 Encoding
RTSP Streaming
Raspberry Pi CM4
Sony IMX477

What We Built

Focus designed a module that takes the raw image from the drone’s camera, compresses it into a standard video stream, and sends it to the systems that need it. It captures a Sony IMX477 sensor over MIPI CSI-2 and outputs 1080p30 H.264 video over Ethernet, USB and analog at the same time.

To meet the deadline, Focus built a custom carrier board around the Raspberry Pi Compute Module 4. Its hardware encoder handles video with almost no load on the processor. The software is a pipeline of proven open-source tools rather than custom firmware, so the team could test it before the final hardware arrived. All components met the Made in Canada certification, with no PRC-origin parts.

‍

No items found.

Impact

The module gave Escarpment’s drone its first working link between the cameras and the video transmission and processing systems.

3 Months to Prototype

Focus went from kickoff to a prototype-ready module in time for the client’s September milestone.

From Prototype to Production

The initial prototype run expanded significantly after the module integrated successfully into the drone system.

3 Concurrent Outputs

Ethernet, USB and analog outputs let the same module work with both digital and legacy video systems.

Made in Canada Compliant

No PRC-origin parts, with Canadian PCB fabrication and assembly.